Everyone

Ulrich Holeschak

KitKat

This open source app uses the original BMW and VAG ECU files for OBD communication.
Theoretically all operations that are possible with INPA or Tool32, could be also executed with this application.
With a configuration generator simply select the diagnostics jobs to execute and create your own configuration files.
For complex tasks the configurations files could be created manually.
The app requires 2.5 GB of free external storage.
The application supports the following OBD II adapters:
- Standard FTDI based USB "INPA compatible" D-CAN/K-Line adapters (all protocols)
- ELM327 based Bluetooth and WiFi adapters. Recommended ELM327 versions are 1.4b, 1.5 and origin 2.1, which are based on PIC18F2480 processor (no MCP2515 chip) (D-CAN protocol only) 
- Custom Bluetooth D-CAN/K-Line adapter (BMW-FAST protocol over D-CAN and K-Line)
- A replacement firmware for the ELM327 Bluetooth adapter is existing, that is faster, more stable and that also supports K-Line (required for VAG vehicles, supports protocols KWP2000, KWP1281, TP2.0)
- Deep BWM OBD ENET WIFI adapter (for BMW F-models)
这个开源应用程序使用原来的宝马和VAG ECU文件OBD通信。
从理论上说是可能的INPA或Tool32所有操作，可以用这个应用程序也执行。
与配置发电机只需选择诊断工作执行并创建自己的配置文件。
对于复杂的任务配置文件可以手动创建。
该应用程序需要2.5 GB的可用外部存储。
该应用程序支持以下OBD II适配器：
- 基于标准的FTDI USB “INPA兼容” d-CAN / K线适配器（所有协议）
- 基于ELM327蓝牙和WiFi适配器。推荐ELM327版本1.4B，1.5和2.1原点，其基于PIC18F2480处理器（无MCP2515芯片）（d-CAN协议只）
- 自定义蓝牙d-CAN / K线适配器（超过d-CAN和K线BMW-FAST协议）
- 为ELM327蓝牙适配器更换固件存在，那就是速度更快，更稳定，同时支持K线（用于VAG车辆需要，支持协议KWP2000，KWP1281，TP2.0）
- 深BWM OBD ENET WIFI适配器（用于BMW F-型号）


\u5b9d\u9a6c\u548cVAG\u8f66\u4e00\u6837INPA\u6216Tool32\uff08\u4e13\u5bb6\u5de5\u5177\uff09\u6df1OBD\u5206\u6790

Deep OBD for BMW and VAG

Deep OBD for BMW and VAG的最新版本

其他版本